From the leak to the rebuild
Mold Removal Cost in Murfreesboro, From the First Leak to the Last Coat of Paint
Mold removal cost in Murfreesboro is rarely one number. A typical job has a repair for whatever leaked, the drying or mold removal itself, and a rebuild of the walls and floors that came out. Nobody publishes Murfreesboro prices, so these ranges come from national guides, named with the year.
This Old House (2026) puts a typical mold removal job at $1,200–$3,750, and Fixr (2025) puts water damage and mold handled together at $2,700–$10,000. The leak repair, from $150–$850 for a pipe (HomeGuide, 2026), and the rebuild are usually separate lines.
Murfreesboro mold removal cost, step by step
| Step | Typical range | Guide and year |
|---|---|---|
| Fixing a leaking pipe | $150–$850 | HomeGuide, 2026 |
| Fixing a small roof leak | $150–$1,000 | HomeGuide, 2026 |
| Mold inspection | $450–$800 | Fixr, 2025 |
| Water damage cleanup and drying | $1,200–$5,000 | Fixr, 2025 |
| Water damage and mold together | $2,700–$10,000 | Fixr, 2025 |
| Small mold infestation | $500–$1,500 | This Old House, 2026 |
| Typical mold removal job | $1,200–$3,750 | This Old House, 2026 |
| Bathroom | $500–$2,000 | HomeGuide, 2026 |
| Ceilings | $1,000–$9,000 | Fixr, 2025 |
| Walls | $1,000–$12,000 | Fixr, 2025 |
| Heating and cooling system or ducts | $2,000–$10,000 | HomeGuide, 2026 |
| Whole house | $15,000–$30,000 | HomeGuide, 2026 |
| New insulation, per sq ft | $1.00–$4.50 | HomeGuide, 2026 |
| New subfloor, per sq ft | $2.20–$4.75 | HomeGuide, 2026 |

Three parts of a Murfreesboro mold removal cost
- Stop the water. A plumber, roofer or HVAC technician fixes the source. A leaking pipe runs $150–$850 and a small roof leak $150–$1,000 (HomeGuide, 2026).
- Dry and remove. The remediation company contains the area, removes moldy material and dries the rest. When a fresh leak is caught early, this may be drying alone at $1,200–$5,000 (Fixr, 2025); once mold has grown, it becomes the combined $2,700–$10,000 job.
- Rebuild. Drywall, insulation, subfloor, flooring and paint go back. HomeGuide (2026) lists insulation at $1.00–$4.50 and subfloor at $2.20–$4.75 per square foot.
What makes mold removal cost more in a Murfreesboro house?
- Time before drying started. A leak found on day one is a drying job; one found after a month is a removal job, because mold starts within a day or two on wet material.
- Two-story layouts. Many newer houses have bathrooms and laundry upstairs, so a leak soaks the ceiling below as well as the floor it started on.
- Ducts and air handlers. Growth in the cooling system runs $2,000–$10,000 (HomeGuide, 2026).
- Finished surfaces. Hardwood, tile and cabinets cost more to remove and replace than carpet and paint.
Which license covers the rebuild in Rutherford County?
Tennessee lists mold remediation as a specialty classification on a contractor license, with no trade exam, and has no separate mold license. The rebuild is where Rutherford County's rules bite: residential repair and remodeling from $3,000 to $24,999 requires a Home Improvement license in the nine counties that adopted the law, Rutherford among them, and a project of $25,000 or more needs a contractor's license (Tennessee Board for Licensing Contractors). Ask each company which license covers its part of your job, and check it at verify.tn.gov. See mold remediation, step by step.
Reading a quote, and where these figures come from
A useful quote names the water source and who fixes it, lists rooms and approximate square feet to be removed, describes containment and drying, says how the result will be checked, and says whether rebuild is included. Get the warranty in writing. The ranges above are national, from three guides that agree closely where they overlap; this site does not make up Murfreesboro prices.
Cost questions
Does homeowners insurance pay for mold after a burst pipe?
Often the sudden water damage is covered, and mold is covered only within the policy's limits or when it results from that covered event. Slow leaks and humidity are commonly excluded. Report the loss quickly, photograph everything before cleanup, and ask the adjuster in writing about mold before work starts.
Is drying cheaper than mold removal?
Yes, when it happens in time. Fixr (2025) lists water damage cleanup and drying at $1,200–$5,000, against $2,700–$10,000 once mold removal is added. Fans and dehumidifiers started on the first day are the cheapest step in the whole process.
What does mold removal cost in one bathroom?
HomeGuide (2026) puts bathroom mold removal at $500–$2,000. Spotting on caulk or a painted ceiling, if it covers less than about 10 square feet, is the kind of patch the EPA leaves to homeowners. A leak behind the tub or shower that soaked the wall or subfloor costs more and needs the plumbing fixed first.
What happened, and where is the mold?
Tell the specialist roughly when the house was built, the room, and what got wet: a pipe, a storm, the river, or nothing you can name. If walls or floors will need rebuilding, mention it. A mold specialist serving Murfreesboro receives your note and replies.